Showing 1–24 of 78 results
Sort by
АРГОН ГАГНУУРЫН ВОЛЬФРАМАН ЭЛЕКТРОД WLa / Цэнхэр
0₮ – 90,090₮
J421 ESAB Төрлийн электрод 25 /Хятад
0₮ – 38,500₮
АРГОН ГАГНУУРЫН ВОЛЬФРАМАН ЭЛЕКТРОД / Ногоон
0₮ – 16,940₮
АРГОН ГАГНУУРЫН ВОЛЬФРАМАН ЭЛЕКТРОД / Цэнхэр WL
0₮ – 26,950₮
CIGWELD Аргоны электрод / Comweld AL4043
Comweld AL4043 is premium quality Aluminium – nominal % Silicon Alloy rod used extensively for the repair welding of selected* Aluminium alloy castings
- 321610 – 1.6mm – 2.5kg
- 321611 – 2.4mm – 2.5kg
- 321612 – 3.2mm – 2.5kg
- Aluminium – 5% Silicon Alloy Rod
- Suitable for Gas Welding and Gas Tungsten Arc (GTAW / TIG) Welding Applications
- Embossed with AS / AWS Class 4043′
- For the repair welding (fractures and blow holes etc) of selected aluminium alloy castings
S-700B.B ЭЛЕКТРОД / Hyundai Welding
Hyundai Welding, Гагнуурын электрод / Stick Electrodes, Хуяглалтын зориулалттай электрод / Hard Facing
Онцлог:
- Араа, краны дугуй, рольк /ган дугуй/ гэх мэт элэгдэлд тэсвэртэй ганг хуяглах, шавах зэрэгт ( AC or DC± )
- Гагнагдах материалыг 150⁰С-с дээш урьдчилан халааж гагнавал илүү үр дүнтэй
- Боломжтой бол 600⁰С-д халааж аажимаар зууханд хөргөж дулааны боловсруулалт хийвэл илүү цууралтанд тэсвэртэй, чанартай болно
- Мартенсит бүтэцтэй ганд тохиромжтой
- Гагнасны дараа Машинаар гадаргуун боловсруулалт хийх боломжгүй
- Хөрс, шороо зэрэгт тэсвэртэй эд ангид ашиглана
Cobalarc Austex / CIGWELD
Cobalarc AUSTEX is a metal enriched, Rutile type extruded electrode
Packaging Data
613973 – 3.2mm – 5kg Pack
613974 – 4.0mm – 5kg Pack
613975 – 5.0mm – 5kg Pack
Features & Benefits
- Metal Enriched, Rutile Type Electrode
- For joining dissimilar steels or as a buffer later prior to hard surfacing
- Tough, machinable austenitic stainless steel deposit
Cobalarc Borochrome / CIGWELD
Cobalarc BOROCHROME is a popular high alloy extruded hard surfacing electrode manufactured by CIGWELD
5kg Variations
613964 – 4.0mm
613965 – 5.0mm
Highly Alloyed Manual Arc Electrode
Martensitic Chromium Carbide Iron Deposit
Ideal for Fine Particle (Wet or Dry)
Abrasion and Low Impact Loading
Primary Chromium Iron Carbides in a Hard, Martensitic Matrix
Cobalarc 650 / CIGWELD
Cobalarc 650 is a basic electrode for the hard surfacing of steel components subjected to wet or dry hard particle abrasion and low to moderate impact loading.
5kg Variations
- 611463 – 3.2 mm
- 611464 – 4.0 mm
- Basic Type Manual Arc Welding Electrode
- Resistant to hard particle abrasion and moderate impact loading
- Air hardening, crack-free martensitic steel deposit- 650 HV 30\
Cobalarc 750 / CIGWELD
Cobalarc 750 is a smooth running, rutile type electrode specifically designed for AC hard surfacing applications.
Packaging Data
611473 – 3.2 mm – 5kg Pack
611474 – 4.0 mm – 5kg Pack
Features & Benefits
- Resistant to Hard Particle Abrasion
- Air hardening, crack-free, martensitic steel deposit – 750 HV30
- Easy arc start and stable running on portable AC welding sets (>45 O.C.V)
ESAB ШИРЭМНИЙ ЭЛЕКТРОД / OK 92.18
OK 92.18
SMAW
Type Basic-special, high graphite
A nickel-cored electrode for welding normal grades of cast iron. The weld metal is soft and easily machinable. Deposition is performed on cold or slightly preheated material. The electrode is suitable for the joining/repair of grey and malleable cast irons and the joining of these cast irons to steel, monel and copper.
Thin sections can be welded cold but it is recommended that preheat be used when welding thicker sections. When welding select the smallest diameter electrode practical and operate at low currents to keep dilution to a minimum. Stringer beads should be deposited using a stepped short run technique to avoid overheating of the workpiece.
During welding the joint can be lightly peened and on completion the workpiece should be allowed to cool slowly.
Welding current:
AC, DC+/- Min OCV 50 V
SC-81MC ГАГНУУРЫН УТАС / Hyundai Welding
Hyundai Welding, Хагас автомат гагнуурын утас / MIG Wires, Даацын гангийн утас / Tensile Steel / High Tensile Steel, Гагнуурын электрод болон утаснууд / Welding Consumables
Стандарт: AWS A5.29 E81T1-Ni1M-J H4
SC-81M is an all position flux cored wire designed for Ar+20~25%
CO2 shielding. You can get smooth arc, and low spatter, good
weldability. The weld metal impact values at –60℃(-76℉) is
excellent and has good bead appearance, slag covering is uniform
and easy to remove.